Skip to contentSkip to search
Kaplan Publishing: Black Friday countdown

PM*** F5 December 2014 Exam was.. Instant Poll and comments ***

Oopentuition_teamAdmin11y ago

Please vote in our Instant Polls about the F5 December 2014 Exam.

*** F5 December 2014 Exam was.. Instant Poll and comments *** poll results *** F5 December 2014 Exam was.. Instant Poll and comments *** poll results *** F5 December 2014 Exam was.. Instant Poll and comments *** poll results Please note, the ACCA have asked us to allow posting comments only after 5pm UK time.
GGvtftf11y ago#211
I think it us clear that the answer was $16
AAhsan11y ago#212
Regarding 3Es the answer is 3,2,1 m I right ?
Ttbm1311y ago#213
@icedgod2002 said: What about elasticity for penetration? A small drop in price leads to a large increase in demand. Or have a got it the wrong way round.
I think the question mentioned inelasticity, in which case penetration pricing would not be good. (If demand doesn't change much when the price changes, it's good to charge a high price, i.e. market skimming). Penetration is good to keep competitors out. It's bad when there's a short life cycle.
SSunny11y ago#214
Gvtftf, you've got a bloody memory about what was on the exam!
GGvtftf11y ago#215
Haha ACCA influence :D
Former userFormer user11y ago#216
Price penetration was 2nd & 3rd options - economies of scale and discourage new entrsnts
MMatthew11y ago#217
Bah genuinely can't remember if it was relatively elastic or inelastic but I agree with what you say
GGvtftf11y ago#218
Exactly!
Ttbm1311y ago#219
3 senior stylist, 2 junior stylist, 2 assistant bottleneck senior stylist: 2400 * 3 = 7200 hours TFC: 200,000 for salary; about 106,400 for other. 306400 / 7200 = 42.56 per factory hour. Treatment: (110 - 8.0) / 1.5 = 68 throuput per hour TA: 68 / 42.56 = 1.60 Cut: (50? - 0.60 ) 1 / = 5x.xx throuput per hour
GGvtftf11y ago#220
Did not multiply by 3 and took material cost for cuts as 8. I hope they will award me with some credits
Ttbm1311y ago#221
3.04 hours (as someone mentioned before), round to 3: 3 * $15 = 45 Was it 240 other expenses? 240 + 45 = 285 50% markup: 142.5 142.5 + 285 = 427.5 or something like that... learning rate: 70% learning rate is better, so it will take less time. Price will therefore be lower.
GGvtftf11y ago#222
You got it right ;) what about questions 3 and 5!
Ttbm1311y ago#223
Relevant costs: 200 fabric: cannot remember. I believe all of it was at 17.50 50 wood: 30 has to be bought at "emergency price" (8.50?); the other 20 can be used at normal rate (8.20?) because they are not needed soon; however, they ARE needed, so the cost is not zero. Skilled: 150 spare time and they are paid anyway, so 150 h is a committed cost. However, 50 has to be worked at overtime (x1.5). Semi-skilled: cost is $12 x 1.5 because of overtime. Cheaper to use local agency at $14 per hour. Overhead: I believe none of these overheads are relevant since they just absorb fixed costs and fixed costs are not relevant. However, 15 or 20 hours overtime of supervisor at $15 at $20. 15x20 = 300 Total: $9619 or so
GGvtftf11y ago#224
For D we had 30 contribution per labor hour, so produce all 400 units which takes 800 hours. We had 2160-800 hours left, the second place went to A with contribution per labor hour of 7.6, some of units were produced as well
GGvtftf11y ago#225
Got 9455 in this one
Ttbm1311y ago#226
Q4: Perspectives: Financial performance Internal Customer Innovation & development No idea what they wanted to hear in terms of targets and measures and reasons. I wrote 2 pages. I hope some of it makes sense.
GGvtftf11y ago#227
Did you have feedforward control?
Ttbm1311y ago#228
Q5: A 0.25 - $10 B 0.6 - $4 or $3? C 0.5 - $3 or $4? Total: 1.35 kg, $17 Mix: take actual kg and see how they would be allocated in standard mix (/1.35 * 0.25, /1.35 * 0.6, /1.35 * 0.5). This gives variances that add up to 0. Multiply these variances by the std cost (x10, x4, x3). Yield: 160,000? units produced * 1.35: how much it should have taken. Compare with kg actually kg used: multiply by standard cost per kg (17/1.35 = $12.60) Yield (alternative): how many units should actual kg have produced: xxx - number of units produced. Multiply by standard cost ($17) Unfortunately, I think I got this calculation wrong. My mix was favourable and my yield as well. I think mix by around 4000 and yield by 28000 or so. But I think this is wrong. Part 2: mix was adverse, yield was favourable, which suggests higher quality input was used (more expense, less cheaper input) I guess this means that explanation that sales volume change was caused by quality does not make sense.
AAhsan11y ago#229
Yes feed forward control is right
Ttbm1311y ago#230
@emo777 said: Did you have feedforward control?
I think that's correct because the thing they predicted hasn't actually happened yet. So they made a change before it happened, which I think is feed forward.
AAhsan11y ago#231
Anyone remember the answer of 3Es it is 3,2,1 !?
GGvtftf11y ago#232
Yeap, with this one you messed a little bit, but i see your ideas. Yield was fav, as actual 136000 was higher than budgeted 134400. Consideting our comments on sales manager, i agree, cause customers value quality, and it was enturely his fault that he could not increase sales
GGvtftf11y ago#233
I think the answer for this one was D
Ttbm1311y ago#234
@ahsen22 said: Anyone remember the answer of 3Es it is 3,2,1 !?
I don't know. I struggled with this one. I remember one was about reducing some expenses by 5% or so. I guess this is economy, but I'm not sure. One was about getting people to work 6.2 instead of 6 days. I guess this is efficiency (income-output)? Or is this economy? And one was to make customers happier or something like that. I think this is effectiveness: doing what you're supposed to do.
GGvtftf11y ago#235
Right
NNeil11y ago#236
Same here some of them were exact copies
IImad11y ago#237
On regards to Q4 part be I have answered this questions with table balance score card,measure, goal and explanation
AAhsan11y ago#238
Anyone knows the answer of environmental accounting ?
Aakhtarshaikh11y ago#239
Tpar was more than 1 for both.
Ttbm1311y ago#240
@ahsen22 said: Anyone knows the answer of environmental accounting ?
Statement 1: the majority of environmental costs are already in accounting systems but they are hidden. Statement 2: input/output analysis includes .., system, .. Statement 2 applies to material flow accounting, so is wrong. I'm not sure about statement 1. If it said "some" instead of "the majority" it would definitely be correct. But are the majority of environment costs included? What do you think? I think it's correct but I'm not sure.
Topic lockedNew replies are closed.