Skip to contentSkip to search
Kaplan Publishing: Black Friday countdown

PM*** F5 March 2016 Exam was.. Instant Poll and comments ***

Oopentuition_teamAdmin10y ago

Please vote in our Instant Polls about the F5 March 2016 Exam.

*** F5 March 2016 Exam was.. Instant Poll and comments *** poll results *** F5 March 2016 Exam was.. Instant Poll and comments *** poll results *** F5 March 2016 Exam was.. Instant Poll and comments *** poll results Post your comments about F5 exam below
MMuhammadAli10y ago#91
@wmchoong said: Can any body tell me that ACCA will publish the March2016 Section B questions or they only publish after the June2016 exam like that previous practise part of September 2015 And December 2015 section B questions.
I think a hybrid paper will be issued after every six months. So yes, a cumulative paper for March and June 2016 will be issued just like they issued for September and December
Oodufale10y ago#92
yes std rate per hr is 4
Aahmira10y ago#93
exams questions was confusing
Oodufale10y ago#94
@flapper84 said: For the labour rate planning variance I compared the number of hours paid at $14 per hour with the revised rate of $14.28 and recorded an adverse variance of $0.28 x the number of hours worked (can't remember the number of hours) Labour rate operational variance was favourable because the actual rate paid was lower than the revised rate but overall the variance was adverse. The labour efficiency was adverse for planning but favourable for operational, the total labour efficiency was favourable which was remarkable given the additional time it was supposed to take for the new design.
yes that is exactly what I did.
Oodufale10y ago#95
@bukenya said: They said if overtime is required, I didn't not see overtime paid in that regard, I forewent it
ignore overtime not relevant
Oodufale10y ago#96
std rate per unit is14
TTayyab10y ago#97
For ROI related question, I calculated 22% for Y2016 and 15.20% for Y2017, anyone?
CCaroline10y ago#98
The paper was fair, only that students are good at spotting and become disappointed when what we expected dont come in the exam I found the aspect of inflation challenging to me and that of lost contribution in lifecycle costing
Oolayemi10y ago#99
same here
TTayyab10y ago#100
some of MCQs: 1) One was related to outsourcing; my answer was "G only" 2) One was related to constraint, my answer was "Demand" 3) One question was about information security; my answer was "Anti-Virus & Encryption" 4) I did learning curve question wrongly, I calculated for 100 items and chose the answer, I should have done first for 100, then for 99 and difference between these 2 was the answer 5) There was one question for ABC, my answer was 74$/unit (I think) 6) MIS; my answer was a system to record transactions and management reports (something on these lines)
MMohamud10y ago#101
I think the correct answer was A 1.54 hrs
Ffarai10y ago#102
original standards were labour rate was $42/ hour and each pair took 3hours to make 12000pairs therefore in total 36000 hours were budgeted for and actual pairs being 12600 pairs for 37000 hours. the efficiency variance, the standard hours would be found by finding out how many hours 12600 pairs would have taken. i.e ((12600x3hrs/pair) and comparing it with actual 37000hrs)) x std rate $42/hour. at least that's what i thought was needed. anyone who had the same answer??
AAbdiaziz10y ago#103
The learning curve was 1.54 i think, constraint was demand as you put it. the outsorcing one was neither of them i think because it was cheaper to make all of them than outsourcing them, that is how i got after calculation. The MCQs were abit tricky.
AAbdiaziz10y ago#104
The standard labour rate per hour was $14 not $42. it is 42/3.
TTom10y ago#105
Thought the MCQs were tough. Required such an in depth and accurate knowledge of the course. Kept on second guessing myself for MCQs that had statements and asked which ones are correct. The long questions whilst challenging were much fairer than the questions in the December 2015 paper. Please god, I have done enough to scrap a pass!
AAbdiaziz10y ago#106
Any one who got 91.25 for the ABC MCQ?
CCee10y ago#107
I am getting rather concerned now. I am seeing some answers saying the overall efficiency Was favourable. I got adverse for Both in the 2 mark question. 2 unfavourable planning 1 very favourable Labour efficiency (operational) 1 slightly unfavourable Labour rate (operational)
SSaph10y ago#108
@christa316 said: I am getting rather concerned now. I am seeing some answers saying the overall efficiency Was favourable. I got adverse for Both in the 2 mark question. 2 unfavourable planning 1 very favourable Labour efficiency (operational) 1 slightly unfavourable Labour rate (operational)
I got exactly the same as you Christa! And I normally considet variances as one of my stronger topics. My main concern was not including overtime, but I've seen many people ignored that aswell. Either way, for such a big mark question, I'm sure we'll get some.
Ffarai10y ago#109
@anyani said: I would say question 3 , 4, 5 where pretty easy. question 3 was life cycle costing 4 balance score card explanation and application to the question (1 goal, 1 measure, and reason) 5 straight forward operational and planning variance with tricky numbers. (Labour per pair of shoes 42$. one pair took 3 hours ). Then access manager's performance. Overall question 1 took more of my time. I had no clue what was going on there for a while. Question 2 what the inflation and depreciation needed a bit of focus.
that's exactly what i did on variance question
PPslana10y ago#110
I got 91.25 too
KKatherine10y ago#111
How did you guys work out ROI? I think i got 40 something % i cant remember exactly which sounds wrong as most of you got 30%, i did the net profit + return on investment + inflation over capital employed minus depreciation + new investment minus depreciation + inflation?
KKatherine10y ago#112
Also am i the only one who did Section B Q1 a) as a Tabular form?? I still got the same answer as most of you 4 batches but i did it in a table?!
SSaph10y ago#113
@kazcaiels said: Also am i the only one who did Section B Q1 a) as a Tabular form?? I still got the same answer as most of you 4 batches but i did it in a table?!
I think it had to be done in a table because we couldnt use the formula. Many of us got the same answer so I'm hopeful that it was the right approach.
SSaph10y ago#114
For anyone who completed the balanced scorecard question, what did people put as a goal for each perspective? I put: Customer - reduce the amount of inaccurate bills Financial - Reduce their increasing costs which may help profit (not sure if specific enough) Internal business - Improve customer service, which was bad (not completely sure if this could apply for Internal, or only Customer) Innovation and learning - improve the training of staff and provide incentives fot improvement, as they weren't happy and poorly trained. What did others put?
PPslana10y ago#115
I did almost the same as you but for internal perspective I wrote - to train staff to reduce water interruptions. As for me to write performance mesures were the most difficult in this question.
SSatria10y ago#116
Self studied for f5 for 3 months witb singapore lsbf and opentuition materials. First attempt and i found the paper relatively easy (except q2 depreciation/roi) The calculation questions have tricks in every one of them. I found the theory questions especially challenging Some of my answers i can recall : - neither e or g should be outsourced - antivirus and encryption - mis and eis: only 2 options were correct, internal and external data for eis, making decisions for mis. Unstructured is wrong. - q1, there are many approach (like algebraic but not applicable this time) to solve i think. The question didnt specify what to base the decision on. So i wrote: i assume the company wants to maximise profit (and not contribution) and create a tabular format. 4 batches. Why not algebraic which uses P and q? Because variable cost is not constant prolly due to shipment cost or bulk discounts or internal eos savings by the seller. Why fixed cost increase? Because of storage cost -q2 super tricky ... i create tables and broke down the different parts and adjust the inflation rate and find the new operating profit. Then calculate roi. Disadvantages: roi encourage use of old asset. Roi is in the % and it can worsen goal congruence when used with ri. Elaborate how. Think might lose 5 marks here.... :( -q3 life cycle costs. Include all the sunk costs. Contribution lost is a relevant cost but should not be included in the life cycle cost of the new product. The manager 20k salary is a committed cost and not relevant since he works permemnant there. Made slight losses in year 1 but made huge profits in year 2. Around 62.2m -q4 totally giveaway. One of the past year paper (2013-2015) has this exact same question for 15m on balance scorecard. Just had to copy and past while applying. They used a tabular format to answer part b - planning both adverse Operational eff favourable about 43k Operational rate slightly adverse about 3k but not entirely his fault because his account was not aware of the pay rise too Manager done exceedingly well. Special mentions for performance: No idle hours too. Produced 12600 That year which exceeds the 12000 demand
Former userFormer user10y ago#117
I am wondering the dam thing!!
CCee10y ago#118
Thank you... My mind is at ease now. I was seeing responses with overall fav. efficiency variances and fav op variances for both. I knew I had a small adverse difference of 3,150 for labour rate and a huge fav op efficiency variance. I started to doubt myself.
GGeorge10y ago#119
@sapphire16 said: Slight Off-Topic, (but exam related), I wondered if anyone could answer my query. Today was my first sitting of an ACCA exam, and I understand that on the front sheet of the answer booklet, you have to tick which questions you attempted in Section B (There were 5). I attempted all 5 questions, but I forgot to tick them on the front sheet to say I attempted them. My answer booklet has rough workings on the first few pages for MCQs (which I later crossed out), and I then started each Section B Question on a new page, and shaded in the relevant bubble at the top of the page. It might be a silly question, but will there be any problems recording my marks/marking in general for Section B if I didn't confirm my question attempts on the front sheet, with my answers not seen until a few pages in?
I would suggest you contact ACCA to put your mind at ease but I'm sure it will be ok :)
GGeorge10y ago#120
@ahstpk said: MCQ: One was which is constraint as per limitation factor: wood labour inspection ( I guess it was something else) Output (correct Ans.)
Yes I agree
Topic lockedNew replies are closed.