Skip to contentSkip to search
Kaplan Publishing: Black Friday countdown

PM*** F5 December 2015 Exam was.. Instant Poll and comments ***

Oopentuition_teamAdmin10y ago

Please vote in our Instant Polls about the F5 December 2015 Exam.

*** F5 December 2015 Exam was.. Instant Poll and comments *** poll results *** F5 December 2015 Exam was.. Instant Poll and comments *** poll results *** F5 December 2015 Exam was.. Instant Poll and comments *** poll results Post your comments about F5 exam below
Bbullocin10y ago#61
what's the title of the article
Iinebimo10y ago#62
Q1. Mix and Yield Variances. Simple and straightforward. Got 3 Adv or something like that for material mix. Converting to kg was: 45g/1000 = 0.45kg etc and total input was 0.61kg Yield was 20 something Fav Part b asked for possible reasons that can lead to material Yield being adverse. The only one I remember writing is that baking the bread had too many processes involved (5, I think) and that meant too many hands were involved which could lead to material waste Q2. I had to look long and hard at this question before I figured it was throughput. By the time I finally kinda understood what it was, it was too late to do anything. I think the information given about throughput was irrelevant and designed to confuse. Worst question for me. Thank God it was 10 marks and not 15. Q3. Clearly incremental and clearly not participative. It was more of an imposed style. Part b asked for effects - demotivation of JT and CD, lack of goal congruence and use of old techniques by the old man, I've forgotten his name The comment about "3 marks for saying JT and CD will go and get unmotivated and cry in their office" got me laughing like a hyena? Q4 was a divisional performance question. Including head office costs, I got 14.4% ROI for Div F and a bonus of 4 x 2,400 = 9,600 Excluding head office costs, I got 34.5% ROI for Div F and a bonus of 17 x 2400 = 40,600 but capped it at the maximum (30 or 36k, can't remember) Div N was about 6.5% ROI with head office costs and 9.5% ROI without it. The manager didn't get a bonus in either case. I added the new investment and 8% additional profit to the 2nd calculation. I'm not sure about my Div N answer sha. Q5 was limiting factor analysis and I was initially scared but I think it turned out well. Part a was Mat A - 1kg x 1.60 Mat B - 2 kg x 1.50 Labour - $8 x 2 hrs V O/H - $0.80 x 3 machine hrs Total- $23 Part B Mat A had enough material to make only 600 units Mat B had enough for 800 units of component x Labour was also unlimited At the end my answer was: Manufacture: $23 x 600 = 13,800 Buy: $28 x 200 = 5,600 Total = 19,400 If we had bought all for $28 x 800 = $22,400 Therefore we saved $3,000 Although my presentation for part B was ALL OVER the place. Mcqs were fair, much easier than opentuition's and kaplans mock which I both failed yesterday and was sad as a result. Sully me huh! I hope I manage to get 20 marks in the Mcqs at least and get 50 at least to get over the f5 nightmare
Ttasha672010y ago#63
I was also really disappointed. I did a lot of study and found the questions difficult. I did question 5 as my first question and it totally put me off. Not the confidence booster I needed because my last exam was only f3 and now I dont know if I am able for acca. My only hope is that if the exam is difficult than usual they might mark it easier.
Ggosha10y ago#64
Totally agreed.
BBabawale10y ago#65
@sophiemuzz said: ROI question, is it the non current asset/relevant profit or is it assets-liabilities? I cant remember and cant find it anywhere that explains it in black and white
I think ROI is strictly investment like non current asset and not capital employed which would include long term liability and all. Although they are essential the same
JJason10y ago#66
@haibe said: I think ROI is strictly investment like non current asset and not capital employed which would include long term liability and all. Although they are essential the same
My Kaplan text books says it's capital employed being NCA+CA -CL.
KKuriakose10y ago#67
I did in the same way........
JJason10y ago#68
@christa316 said: How did you guys calculate question 2 I just used the throughout times the units produced in option one. ? I only got the 2% times the salary for the first division. What figures did you use to get the divisional profit
I just did the additional units multiplied by the $12,500 benefit given in the question. I think this might be wrong though..
Ssokratis10y ago#69
so you think if i did the ROI question net profit/ strictly investment like non current asset is wrong? please advise
CCee10y ago#70
Only the non current assets. Who else got 11 % as the roi for the first one.. as a result i only got 2% times the 150000 which is 2400.the second one i used an average
CCee10y ago#71
Capital employed is alll assets. That should include receivables as well. Shouldn't it
JJason10y ago#72
@poutsos said: so you think if i did the ROI question net profit/ strictly investment like non current asset is wrong? please advise
I think so, going strictly by the book it says - controllable profit divided by capital employed and that capital employed is total assets less current liabilities or total equity plus long term debt.
CCee10y ago#73
Wasn't the bonus based on divisional profit and not based on the manager profit.. I used the net profit. And for question 2 did they ask for the profit or the benefit for using the options. Option 1 was the only option that resulted in a profit. So an additional 200 units were received
JJason10y ago#74
Maybe I didn't read the question properly but I thought there was a manager for each division and they stated the controllable profit they earned each for their division, i.e the Divisions F's profit and the Division N's profit?
CCee10y ago#75
The bonus was based on divisional profit as far as I can remember. Divisional is traceable profit
DDDhalladoo Dalina10y ago#76
Question 2 and 5 was just like the OMG type. Hope that I will get at least 50% s0 that I will not have to resit for march session. By the way when will the results appear?
RRosemene10y ago#77
Section B Topics were: Material Mix and yield variances ** my fav**, Key factor analysis, Budgeting systems ** Mr. Molar; which I thought was silly**, ROI and the hardest one **can't remember now. Multiple choice were not as bad as before. I'm disappointed given the level of studying and question practice I did. I did not know how to approach 2 Questions in section B (key factors analysis and the one about net benefit of the options). I don't know if thats a do over again.... very disappointed. Hoping for the best.
Ssokratis10y ago#78
guys iam sorry but net profit/cost of investment....thats the formula all over the world! the cost of investment you always put it as non-current asset. Total assets-current liabilities is ROCE? no...?
JJason10y ago#79
Well I am just lifting directly from the Kaplan study book at it equates the Investment element of the equation to "Divisional Capital Employed" i.e the Division's NCA+CA - CL. This is from the tutor here on another thread, probably explains things better - "When asked in the exam, ROI relates to divisional performance measurement. In this respect it is exactly the same as ROCE except that of course a division has no capital employed – hence it uses total investment (i.e. total net assets unless told otherwise). (Obviously for a division there is no interest or tax involved when looking at the profit)" So Net assets are NCA +CA - CL correct?
GGordon10y ago#80
a horrible exam, too short on time to be figuring out whats being asked as in Q2 and Q5. Mix and Yield Q, Divisional Performance Q and Incremental budget questions were fair. MCQs were ok. No learning curve, no decision trees, little on information systems. Roll on March
Gglenford10y ago#81
I am also in agreement. I was very prepared for this exam and am left in the balance of whether I did enough. Question 2 was obsurd, the one with limited factor wasn't bad and the rest OK. Too much brain teasing questions in one exam.
Sshah10y ago#82
If F5 is going to be this hard, i would hate to see P5,,,,,,,a very disappointing paper from the start, spent so much time studying and even if i had spent another 2 wks revising don't think it would have made much difference coz the exam was just crap!
JJoanna10y ago#83
hi guys! the best part is that it is over now!!! it wasn't too bad i reckon, although last question was a bit bizzare.... however i see few other ppl have arrived at answer similar to mine- cost of Making unit X was 23 and then material A was limiting factor and we can only make 600 of X and the remaining 200 we ought to buy!!! so fingers crossed that would be the right answer... or we are suffering at the same delusion ;P
Sshah10y ago#84
ACCA please sack your examiners now, or else we would leave and move onto a different qualification!!!!
Cchang10y ago#85
This sitting is really hard studied everything but still can't answer the question
Cchang10y ago#86
I got the answer 600 unit and 200 unit too
SSsandwichH10y ago#87
I trying this F5 four times this is most difficult paper Why F5 cannot let me easily passed?
Sshahid10y ago#88
@rossg said: I agree with Material A being the limiting factor. I can't remember the detail to the rest of it, though.
Sshahid10y ago#89
I think this time Examiner deliberately tried a successful attempt to fail F5 students ..... it doesn't seems like a F5 paper ....... it was a far away from past papers .... it was a disaster indeed .....
ASalawi sayed10y ago#90
Regarding the ROI there is one untraceable amount to the division profit anybody know if we have to add it back to the profit..... this exam was hardest I have ever seen.
Topic lockedNew replies are closed.