Skip to contentSkip to search
Kaplan Publishing: Black Friday countdown

PM*** ACCA F5 December 2017 Exam was.. Instant Poll and comments ***

Oopentuition_teamAdmin8y ago

Please vote in our Instant Polls about the ACCA F5 December 2017 Exam

*** ACCA F5 December 2017 Exam was.. Instant Poll and comments *** poll results Post your comments about the ACCA F5 exam below (comments will open after 5pm UK)
Aanastassiya8y ago#31
@heychi said: I'd be interested to know what people put for: Characteristics of service question. I actually thought they were all characteristics lol. Figures for the Variances - sales mix was favourable for me and sales quantity was averse. Figures for profits: $301 or something and $449 for the other budgeted. OAR - $146 per unit. Did anyone get the same?
about services the difference was at point of heterogenious and homogenious,not all was applicable
LLucy8y ago#32
@rajeshram said: I selected option which said , services can be stored and used or something , my understanding was services are perishable , Regarding the Variance question - boom ! Got the exact same numbers
Omg this gives me hope haha! and did you get weird decimals as well in between the sales mix variance? like they weren't whole numbers. I worried I was doing it wrong. I also selected the last option about perishability too. The others made more sense to me really.
MAmohammad ali8y ago#33
how much units answer close target cost?
Aanastassiya8y ago#34
@heychi said: hahaha me too! my answer didn't match any of the options but I think I guessed the last option too - the 1433.33 or something right? What was the throughput question again?
About life cycle putted the same answer because from calculations it was only one number more or less close to variants of answers)))
LLucy8y ago#35
@anastassiya777 said: about services the difference was at point of heterogenious and homogenious,not all was applicable
Ahh that was it! This is the right answer.
Aanastassiya8y ago#36
@musmang44 said: How much u ll lopse if u used contribution per unit :'(
Unfortunately i also used cobtribution.i realised it but was too late to change the figures,time pressure.i believe it was 8 marks so assuming maximum 2 marks for profit indication to loose.
AAnshu8y ago#37
@heychi said: I'd be interested to know what people put for: Characteristics of service question. I actually thought they were all characteristics lol. Figures for the Variances - sales mix was favourable for me and sales quantity was averse. Figures for profits: $301 or something and $449 for the other budgeted. OAR - $146 per unit. Did anyone get the same?
regrading services there was ne mentioning homogenity or sth like tht which is incorrect
LLucy8y ago#38
@anastassiya777 said: About life cycle putted the same answer because from calculations it was only one number more or less close to variants of answers)))
For question 31, what did you use to assess the performance? They were two different products and only one year was available really. I used Gross/Net profit margins and then used the variances.
AAnshu8y ago#39
which were the sales mi variance and the quantity variances?
Aanastassiya8y ago#40
@aglong said: I'd be interested to know how other people approached the last question - as there was no BS sheet info, couldnt perform ROCE (etc.) calculations... apart from gross and net profit margin %'s, what other calculations did other people use? Thanks
i calculated finance costs cover ratio assuming it was interest costs.also some numbers about changes in costs that were in the scenario like decrease 50% of admin costs expected and generally sales % changes.indeed without balance sheet not much to calculate.
RRajesh8y ago#41
@heychi said: Omg this gives me hope haha! and did you get weird decimals as well in between the sales mix variance? like they weren't whole numbers. I worried I was doing it wrong. I also selected the last option about perishability too. The others made more sense to me really.
Yes very weird decimal points , I am more worried about the relevan costing in section B , did anyone select 110k for new machine cost ?
Aanastassiya8y ago#42
@heychi said: For question 31, what did you use to assess the performance? They were two different products and only one year was available really. I used Gross/Net profit margins and then used the variances.
if u mean about 3 mrks for calculations?i actually used this 10% increase in market so assumed we could divide on planning and operational additional variances to calculate.not sure if it was right.
Aanastassiya8y ago#43
@rajeshram said: Yes very weird decimal points , I am more worried about the relevan costing in section B , did anyone select 110k for new machine cost ?
i choosed 120k.indeed relevant costing area not the best.
LLucy8y ago#44
@rajeshram said: Yes very weird decimal points , I am more worried about the relevan costing in section B , did anyone select 110k for new machine cost ?
I put $90,000 for that one.
Oodean8y ago#45
@heychi said: I put $90,000 for that one.
I think it was lowest figure between the current purchase price 120000 and the resal value of 9000. Therefore 90000
JJames8y ago#46
I got $110,000 for the Relevant Cost Question, as the machine could have been used to produce a separate product making $110,000, therefore being the opportunity cost. Last question i calculated Gross Profit Margin, Net Profit Margin, Interest Cover and talked about the 50% admin expenses, the compensation costs and the foreign currency fall of 25% etc. Anyone get what the Lifecycle Costing one was? I remember guessing that one.
RRajesh8y ago#47
@jgoodall said: I got $110,000 for the Relevant Cost Question, as the machine could have been used to produce a separate product making $110,000, therefore being the opportunity cost. Last question i calculated Gross Profit Margin, Net Profit Margin, Interest Cover and talked about the 50% admin expenses, the compensation costs and the foreign currency fall of 25% etc. Anyone get what the Lifecycle Costing one was? I remember guessing that one.
Lol seems like everyone has taken a guess for that question ?
Aanastassiya8y ago#48
What about learning rate to calculate?which figure?anybody....
LLucy8y ago#49
Questions on learning curve: 1. 21 minutes for 100th unit 2. Can't remember the cost I selected. I think i chose $375 but I was running out of time so that was a guess. 3. Reason for the rate at 80% was it? Can't remember if this was better or worse that expected?? If it was worse I put that the new customers needed the bricks to be cut different from standard and something else. I remember a question bout the Margin of Safety and I put 50%.
Oodean8y ago#50
The margin of safety is 55% you should include the 10% sales commission
448percent8y ago#51
hey guys can someone tell me how you people tackled the 8 marks variance question I mean what was the mix ratio for the sales mix variance ? and what was your answer for that? I struggled with it
Oodean8y ago#52
The reason for the 90% learning curve not 80% is both option. 1 they take longer to produce the product than expected 2. The need the brick at a different standard size
448percent8y ago#53
but they haven't said anything about the size.. i gave 1 only for that I can remember, as the other option was asking for the customers with specific size of their own preference
Aanastassiya8y ago#54
@heychi said: Questions on learning curve: 1. 21 minutes for 100th unit 2. Can't remember the cost I selected. I think i chose $375 but I was running out of time so that was a guess. 3. Reason for the rate at 80% was it? Can't remember if this was better or worse that expected?? If it was worse I put that the new customers needed the bricks to be cut different from standard and something else. I remember a question bout the Margin of Safety and I put 50%.
also got 21minutes and as i remember 375$.it was question about rate before the question about reasons why.it was like to calculate the actual learning rate.
LLucy8y ago#55
@jgoodall said: I got $110,000 for the Relevant Cost Question, as the machine could have been used to produce a separate product making $110,000, therefore being the opportunity cost. Last question i calculated Gross Profit Margin, Net Profit Margin, Interest Cover and talked about the 50% admin expenses, the compensation costs and the foreign currency fall of 25% etc. Anyone get what the Lifecycle Costing one was? I remember guessing that one.
For the last question I did the same and used the same reasons and answers. I tied in that they could try to find a cheaper way to advertise as the costs rose by 50%. I Didn't calculate interest cover though. Altogether I put everything within about 4/5 bullet points plus the calculations. Not sure where the 20 marks will come from as it seems a lot aha.
LLucy8y ago#56
@odean20 said: The reason for the 90% learning curve not 80% is both option. 1 they take longer to produce the product than expected 2. The need the brick at a different standard size
Yes! This is what I got too.
RRajesh8y ago#57
@odean20 said: The margin of safety is 55% you should include the 10% sales commission
I got 44% isn't sales commission 5% or something ?
LLucy8y ago#58
@odean20 said: The margin of safety is 55% you should include the 10% sales commission
I included this and still got 50%.
Aanastassiya8y ago#59
@heychi said: I included this and still got 50%.
I also included the comission in calculation as it still sales.
LLucy8y ago#60
Ahhh I remember one to do with Target costing.. What they could do to close the gap? I selected option 3 only which I think was to negotiate a bulk discount. Increasing the selling price isn't to do with closing the cost gap right? I can't remember the other two options but didn't think they were right for some reason... Anyone remember throughput questions?
Topic lockedNew replies are closed.