Forum Replies Created
- AuthorPosts
- October 16, 2017 at 12:33 am #411440
Passed with 71 on first attempt.
Very blessed. Congratulations to everyone!!!March 11, 2017 at 10:47 am #377792I took Paper based in Dubai and we have the same Q31 and Q32 but we did not have any Lease or Buy Questions.
CBE questions are different than Paper based ones.. I took F8 CBE and when I went to the F8 forum they were discussing about questions which were not on my CBE exam.
March 11, 2017 at 10:38 am #377789Overdraft is NOT included in the operating cycle but included in the Current Ratio..
Right?
March 11, 2017 at 10:37 am #377786Hey guys, How did yo calculate the Overdraft? Question31
March 10, 2017 at 6:59 pm #377650Hey Guys, does anyone know how the Overdraft should have been calculated?
Thank you!
November 19, 2016 at 5:26 pm #350023Understood, sir. Thank you very much!
God Bless you always 🙂
November 19, 2016 at 5:08 pm #350019Thank you for the reply Mr. Mike!
One last question, sir as per your reply, the treatment is to simply deduct the Loan and Interest element. How about Loans that were issued as consideration for the acquisition of the Subsidiary? Do we also deduct this and its interest?
All of my friends use OpenTuition. I recommended it to them few years ago and since then we only use your resources. It is my pleasure to promote the site and its wonderful resources. 🙂
July 18, 2016 at 12:19 am #326332Pass 65% Thank God! 😀
June 13, 2016 at 8:14 pm #322798A manufacturing company, Man Co, has two divisions: Division L and Division M. Both divisions make a single
standardised product. Division L makes component L, which is supplied to both Division M and external customers.
Division M makes product M using one unit of component L and other materials. It then sells the completed
product M to external customers. To date, Division M has always bought component L from Division L.
The following information is available:
Component L Product MSelling price 40 96
Direct materials:
Component L (40)
Other (12) (17)
Direct labour (6) (9)
Variable overheads (2) (3)
Selling and distribution costs (4) (1)
––– –––
Contribution per unit
before fixed costs 16 26Annual fixed costs $500,000 $200,000
Annual external
demand (units) 160,000 120,000Capacity of plant 300,000 130,000
Division L charges the same price for component L to both Division M and external customers. However, it does not
incur the selling and distribution costs when transferring internally.
Division M has just been approached by a new supplier who has offered to supply it with component L for $37 per
unit. Prior to this offer, the cheapest price which Division M could have bought component L for from outside the
group was $42 per unit.
It is head office policy to let the divisions operate autonomously without interference at all.That is the whole real question from the exam.
What will be the profits/(loss) for each division if the external supplier’s offer is accepted?And what will be the total profit of the company if the external supplier’s offer is accepted?June 13, 2016 at 2:07 pm #322742@johnmoffat said:
The ACCA do not publish the MCQ’s and so you will never see suggested answers.They will publish answers to a selection of the Section B questions in a few weeks time.
Where can we see this when they publish it?
Are they gonna publish it on accaglobal?June 11, 2016 at 2:47 pm #322402@isaacfieh said:
sure BED 24000Hey, which question is this from?
June 8, 2016 at 9:58 pm #321209@kanchandhankar said:
Can you list all Mcqs? ThanksI got 16 so far.
1.) Revised Mark Up
2.) Measure of effectiveness of the school
3.) ROI (PBIT/NCA-Acc Dep + Inventory)
4.) Priority to make.. Bottleneck Machine Hours
5.) Incremental Budgeting (i forgot the choices to this one)
6.) Operating Info- Highly Detailed? Regular?
7.) Life Cycle Costing per unit- (the one with the 4 years and whole life costs)
8.) Learning Rate- 75%
9.) Yield Variance.- Quantity or proportion
10.) Further Proccesing. (A and B). is it viable ?
11.) ROlling Budget Quarter 4
12.) Internal Focus… (Market share, Time of development of new product)
13.) Cost+ Pricing.. ( I forgot the choices of this one also)
14.) Units required to breakeven… i cant remember this clearly still
15.) Maximin Definition
16.) Factors to consider when outsourcing or buying in house ( Quality, Spare Hours when not used..I am still trying to remember the 4 remaining.. Lets help each other out! We gotta find out the most probable correct answers. 😉
June 8, 2016 at 9:48 pm #321199@kanchandhankar said:
I chose all options for outsourcing Mcq.What I remember it was to choose points taken into consideration if making a decision to outsource from supplier or made in ..
Oh yes! I remember it clearly now.. I also chose ALL choices
a.) Quality of the supplier’s products
b.) Where the labor hours will go if not used to make in houseI cannot remember the other 2 options tho.. but im sure i picked all 4
June 8, 2016 at 9:39 pm #321190@bilalahmadahmad said:
What was answer of outsourcing mcqs,I supposed that all options were correct?Hello 🙂 What was the outsourcing question about? I can’t remember it..
I am listing down all MCQs. I have 15 now I wanna remember all 20Thank you 🙂
June 8, 2016 at 9:37 pm #321188Hello 🙂 What was the outsourcing question about? I can’t remember it..
I am listing down all MCQs. I have 15 now I wanna remember all 20Thank you 🙂
June 8, 2016 at 6:31 pm #321024Same here I got 18000 but rounded it to 20000 because it said that we need to round it to the nearest 10,000
- AuthorPosts